Est. 2016
212 328 0136

Architectural metalwork · 284 Meserole Street

Metal on the same set as the millwork.

Stairs, railings, screens and hardware — drawn, cut, welded and finished in our Brooklyn shop and installed by our own crew. We take metalwork packages on other people’s jobs as well as our own.

Request pricing

A stair is a joinery problem with a steel spine

The stringer meets the tread, the rail meets the wall, the bracket lands in a stud someone has to have drawn. Split that across a metal shop, a millwork shop and a GC and the tolerance between them is the one nobody owns — which is why the reveal is wrong and the rail sits proud of the panelling.

We draw the metal on the same sheets as the joinery, to the same material and hardware schedules, fabricate both at 284 Meserole Street, and set them with the same crew. The joint between the two trades is ours, so it is not a question you have to ask at a site meeting.

Capability

Stairs & railings

Feature stairs, guards and handrails. Steel stringers and plate, bronze and brass rails, glass and rod infill.

Capability

Doors, screens & grilles

Steel-framed doors and partitions, woven and perforated screens, radiator and vent grilles drawn to the reveal.

Capability

Hardware

Pulls, edge pulls, brackets, plates and escutcheons made to a drawing rather than a catalogue number.

Capability

Metal in the casework

Frames, toe kicks, shelf standards, counter edges and fireplace surrounds built into the millwork package.

Process

Fabricated in house

Cut, welded and finished at 284 Meserole Street alongside the millwork — not bought in and marked up.

Process

Drawn against the joinery

Metal and millwork on one set of shop drawings, carrying the same material and hardware schedules.

Process

Redlined in house

Your sections checked against our shop drawings before they reach you. One review cycle is the target, not the exception.

Process

Our own install crew

Set on the same visit as the millwork where the sequence allows, so the two trades are never waiting on each other.

Who we make it for

On jobs we build

Where we hold the general contract, the metal detail is ours to draw, make, finish and install. There is no subcontractor standing between your section and the finished rail, and no second party to blame for the gap.

For architects, designers and other contractors

We take metalwork packages on jobs we are not building, the same way we take millwork packages — and often alongside one. Send the set; we price it in a week and write down the assumptions for whatever the set does not yet say. We deliver and install along the East Coast, Maine to Miami.

Metal finishes

Blackened and waxed steel, patinated bronze, unlacquered brass, plated and powder-coated work — matched to a control sample before anything is cut. See the finishes

Finish codes carry onto the drawings, so a rail marked MT-01 is the same blackened steel on every sheet it appears on. Swatches read differently on a screen than in a room — ask for physical samples in the light the work will live in.

Lead times — from receipt of a complete set

Pricing

whichever your set supports — not both

Budget pricing from SDs3–5
Hard bid from CDs7–10

Before fabrication

Shop drawings issued for review5–10
Control samples10

Fabrication

in our own shop, from written approval of drawings and samples

Cut, welded and finishedQuoted with the bid—

Delivery & installation

By our own crewScheduled to your date—

Working days. The solid bar is the quick end of the range, the tint is the slow end. Pricing, drawings and samples are the same turnarounds our millwork runs on, because they are the same desks. Fabrication moves with the weight of the package, so it is quoted with the bid rather than promised in advance.

What we need to price a package properly

Incomplete sets are fine. We price what exists and write down the assumptions for the rest, so a gap becomes a line you can read rather than a surprise later.

See the detail